AFAST 1 - Attic Stick
  • Lightweight, easy to manage and store
  • Connects to a break-away nozzle or hose line
  • For a quick knock-down of attic fires and other uses
  • To reduce the risk of collapse or entrapment

The AFAST-1 system comprises a high-flow valve assembly with all American made components and has a full 1-1/2 inch waterway. The pistol grip handle is aluminum and is removable, it has 1-1/2″ NST or NPSH threads on both ends. The shut-off bail is high strength steel and a full 1-1/2 inch opening. The pipe is schedule 40 aluminum and the nozzle tip is machined from billet brass and drilled and machined by hand. Flow tests show between 150 and 230 gallons per minute flow, depending on engine pressure, hose length, and type.
​AFAST 5 - High Rise
The AFAST-5 system comprises a high-flow valve assembly with all American made components and has a full 1-1/2 inch waterway. The pipe is schedule 40 aluminum and the nozzle tip is machined from billet brass and drilled and machined using precision CNC machining. Flow tests show between 150 and 230 gallons per minute flow, depending on engine pressure, hose length, and type.

The nozzle assembly is 34 inches in length, and mates to a 1-1/2″ NST or NPSH male fitting.
AFAST 9 – Can Enhancing Tip
These nozzles will attach to your existing 2.5 gallon pressurized water can hoses, or thread onto your wildland pump can applicator assembly. The model 9-A comes complete with brass barb assembly for inserting in the applicator hose (clamp not included). We can also supply a new hose with tip installed (contact your dealer). The model 9-B has internal female threads for installing on your hand pump applicator assembly.
AFAST 10-Lithium-ion Battery Cooling Tip​
​ The AFAST-10 Lithium-ion battery cooling nozzle is a lightweight, easy to assemble nozzle designed for the cooling of Electric Vehicle (EV) batteries. The nozzle does not extinguish the battery fire but cools the battery pack from beneath the vehicle. The benefit of the AFAST-10 is its ability to flow water at a lower pressure.
  • The nozzle tip flows between 50 and 90 gallons per minute.
  • The nozzle and tip pipe are attached to an aluminum base plate / skid unit for stability.
  • The assembly consists of the AFAST-10 base system, about 72 inches long (yellow reflective tape) and ONE 36-inch extension pipe (red reflective tape) for a total of 108 inches total (9 feet).
  • Extension pipes can be added in any number to increase the distance from the personnel operating the system, but they must be slid along the ground to prevent damage to the pipes.
For more information on AFAST products, contact your sales representative.